Monday, November 4, 2019

Building the Ynnari Display Part 1


Hello out there!
As promised, back with the images and notes on the making of the last Eldar display. Will be back again for a second post on the painting separately.
Really enjoyed building this one, lots of clay work and new and unique style. Hope you enjoy the images as much as I did making it.
See you next time!


Supplies ready to go! Whole lot of Smooth-On two part clay, wood trim, and some hardware.




 A handful of images from my huge folder of inspiration pics. A little bit of architecture here, color there. Mostly going for an ancient temple look.


Basic frame for the front out of pine. This display was built dual purpose - the front part was designed to fit over a wheeled cart for smaller tournaments, and later built a second larger half to combine the two for huge games and events.


The two plates of the frame of the front and back halves needed something to keep them lined up when locking together. For this I bored 1 inch dowels through both while clamped together.


Little epoxy just on the one side..



Dowels cut, epoxied and ready, then a little sanding and testing. Afterward this back plate was set aside until I worked on the back.


Couple of supports to add more point of contact for the foam and to keep the bottom level when sitting on the cart.


Base layer of foam. Keeps things flat, solid surface to work with, and light weight.


First day of clay on the front half. This smaller display is for regular games, so less over the top but with some stepping structure to help show off models, but not so tall as to get unweidly matching up with the front of the other half.




Couple more days of layers. Got a little excited and didnt get pics of every step. The clay takes a good overnight to dry.

Essentially slowly layering clay in with previously sculpted rocks over and over for a real natural look.

Trees the same way. Slowly building up layers and sculpting over wire frame. When wet the clay doesnt have much structure, but once dry it is rock hard and makes a good base for detail later.












 Front half done, time for the back.

Basic structure down and designed to maximize space around strict dimension requirements on the front. Back needs to stay open for future access building the warp gate.


 First step after deciding basic structure was to make the back panels of architecture. These nice laser cut panels were done by Ironheart Artisans. I sunk all of these into layers of plastic strip and weathered the heck out of them.


 Panels up and gate cut. This is tacked into place for cutting out the rest.


 Making a few of many blocks. The sculpted blocks worked great, but wanted quite a few I could place that were already solid, and could be more weathered and destroyed. Allows more layers as well to have a precured step to stick in and then layer around.

 Happy tree.

 Got very excited and didnt take so many pictures when doing the floor and trees, but there are some close ups coming. Wraithknight painted separately, stuck into a first layer of clay, and then slowly built up around.

 Most of the way there building up layers. Nothing in nature is laid down at once, so a long back and forth of small efforts and amounts make it more natural looking.



 I enjoyed everything on here but the trees were a special sort of fun to make.







And that's it folks! Will come back soon for a second round going through the painting process, as that is an equal amount of pictures. See you then, and thanks for reading.